L(Y)SO
L(Y)SO
Features
● High Energy Resolution
● Fast Decay Time
● High Light Yield
● High Light Output
Parameters
| Chemical Formula | Lu2(1-x)(Y)2xSiO5 |
| Density（g / cm3） | 7.2 |
| Melting（℃） | 2050 |
| Hardness（Mohs） | 5.8 |
| Refractive index | 1.82 |
| Decay Time（ns） | ＜42 |
| Light Yield（Photon/Mev） | ≥32000 |
| Radiation Hardness （rad） | ＞106 |
| Hygroscopicity | No |
| Energy Resolution | 8-10% |
| Peak Emission （nm） | 428 |
| Effective Atomic Number | 66 |
| We can produce and manufacture the arrays based on customers’ different design options in terms of pixel size, the number of pixels, pixels separator materials(reflective and/or radiation barrier) and crystal surface finishes. Our 2D arrays are typically used with pixilated photodiodes, position sensitive photo multiplier tubes(PSPMT) and silicon photomultipliers(SiPM). We offer a variety of design options and reflector materials to optimize array performance for the special application. Tianle Phonics manufacturing process ensures high light output as well as excellent pixel to pixel uniformity with minimal crosstalk. | |
| L(Y)SO array assembly | |
| Offset crystal arrays | |
| Upper layer: | 1.78×1.78×8mm³（13×13） |
| Upper layer: | 1.78×1.78×12mm³（14×14） |
| All surfaces of crystal | polished |
| Reflector: | 3M ESR film 0.065mm |
| Dual layer output Arrays | |
| 13×13 Arrays | |
| Pixel Size: | 0.497×0.497×20mm³ |
| Reflector: | BaSO4 |
| LYSO 8 × 8 Arrays | |
| Crystal elements: | 4×4×20mm³ |
| Reflector type: | BaSO4 powders loaded with optical glued. |
|
Note: Parameters above can be customized as required. |
|
Write your message here and send it to us
